E3 Flasher For Ps3

QX Electronics E3 flasher E3 Nor flash Clip Suit Flex Cable for PS3 for ps3 downgrade ic. $26.99 $ 26 99. Kanji Pict O Graphix Rar File on this page. PlayStation 3 Accessory Kits; Video Game Accessories.

- This is the new version which is a lot smaller in size and has a great new eSATA dock which is less bulky. If you are after the e3 flasher a little cheaper, check out the e3 flasher without the Harddrive dock Warning.

This product is not 'hard' to install, but is very easy for you to stuff up your console if you don't read. There is no warranty on the clip device. You have 1 shot to get it onto the console. If you apply the clip wrong you will get a bad read, and the pins on the clip will be damaged.

The plug for the satadock is not Australian, but you can buy an adapter using the drop down box above. A great little breakthrough in the ps3 scence. The E3 flasher is a device that helps you downgrade PS3 consoles.

It will not downgrade ALL consoles. Gemscool Pb Launcher. At the moment it only downgrades NOR consoles, not NAND.

All Slims are NOR, FAT ps3s, you havee to check the model. • CECHA/COK-001 up to including CECHE/COK-002W: NAND FLASH • CECHG/SEM-001: NAND FLASH • CECHH/DIA-001 up to including CECHK/DIA-002: NOR FLASH • CECHL/VER-001 (1-878-196-31): NOR FLASH • CECHL/VER-001: NOR FLASH • CECHL/VER-001 and PS3 Slim 2.: NOR FLASH • And all SLIM console is NOR FLASH Another important thing to check, is that your console was on 3.55 or less out of the box or not. For exmaple if your slim console was 4.00 firmware when you turned it on for the first time, bad luck, you cannot do anything. If you cannot remember what it was on, please check the pictures below • • Please note, that you also neeed the following things to complete the installation • A brain • Screwdriver • A downgrade dongle, to put the console into service mode (we have thee for sale in the drop down box above) • A micro sd card (to dump the files onto) • USB stick - to install the Custom firmware Please note that the firmware E3 will put you on, is a special CFW for 3.55. There is a way to downgrade to 3.41.and from there you can update to whatever you want.

There is also a special E3 custom firmware that has been made that is also compatible with the True Blue dongle. Be sure to use this if you are also buying a True Blue Dongle Below is a demo installation video.

Please watch it in full before buying the product, as limited support will be provided on this product. E3 flasher is a special device to help you programme NAND and NOR flash data. It is simplest to help you get all function with one key operation without any PC software. E3 flasher is also easy upgradable from TF card and PC USB. It has 16M Nor flash memory on board, so you can save data on E3 flasher or TF card in few min, no need connect to PC anymore. E3 flasher has a special design for PS3, to allow user install and operation easier, and even get more function like dual boot. Here is a list to show flash version on difference console: • CECHA/COK-001 up to including CECHE/COK-002W: NAND FLASH • CECHG/SEM-001: NAND FLASH • CECHH/DIA-001 up to including CECHK/DIA-002: NOR FLASH • CECHL/VER-001 (1-878-196-31): NOR FLASH • CECHL/VER-001: NOR FLASH • CECHL/VER-001 and PS3 Slim 2.: NOR FLASH • And all SLIM console is NOR FLASH.

IMPORTANT: Please note the new E3 Flasher does not have the full size eSata dock, photos here are for illustration purposes only. Following is some picture after install.

HOW TO DOWNGRADE WITH E3 FLASHER TO ANY CFW OR ANY OFW 3. Wingate Proxy Server 7 Rapidshare Files more. 55 OR LOWER. This guide is up to date, and works to get your downgradable nor model PS3 on OFW 3.56 - OFW 4.81 to any CFW. Including the new 4.xx+ CFWs.

It will still work if a higher update is released also. If you have a Nand model PS3, you can use the validating dumps steps, and patching tools from this guide. But to see how to setup your NAND flasher and what apps to use to read and write, I suggest using. All files needed are linked in the guide. So you can download them as you go along when you need them.

If you want to Fast Dual Boot OFW and CFW, you can follow after you have successfully got to CFW with this guide. You can also follow this guide if you don't have the limited edition, that comes with the eSATA station. If you are using just the flasher, you will not have anywhere to plug in your hard drive. But don't worry, the HDD does not need to be plugged in.

When the guide says boot to XMB, just boot to the 'cannot find storage device' screen. Before you do Chapter 2, Part 1, Step 13, uninstall your flasher, replace thermal compound, rebuild your PS3, and then continue with the guide.

If you are having trouble, feel free to ask questions in the thread. I or another member will be glad to help you.

If having problems, you should also read through the. It will show you solutions to your ERROR CODES, etc. I suggest if you are going to follow this guide, to take your time and read everything carefully a few times before starting. Here is some important information that you should read. Some things in this spoiler may seem scattered, but is good to read to learn some things about the process.